Aleksandar Karač, |
Detecting
a Structure in Two Dimensions Combining the Voronoї Tessellation and a
Shape Factor |
1 |
Aleksandar Simonović, |
Multi-Objective Fuzzy Optimization of Sizing and Location of
Piezoelectric Actuators and Sensors for Vibration Control Based on the
Particle Swarm Optimization Technique (Part 1: Theoretical Model) |
2 |
Aleksandar Simonović, |
Multi-Objective Fuzzy Optimization of Sizing and Location of
Piezoelectric Actuators and Sensors for Vibration Control Based on the
Particle Swarm Optimization Technique (Part 2: Numerical Analysis) |
3 |
Anatoly Andreevich Martynyuk, |
Homoclinic
Orbits in 3D Dissipative Systems |
4 |
Anis Redjimi, |
Noise
Equivalent Temperature Difference Model for Thermal Imagers, Calculation
and Analysis |
2 |
Belkacem Meddour, |
Three
Dimensional Modeling and a Simulation of the Shape Memory Effect |
3 |
Bojan Pavković, |
Mechanical
Properties of HTPB Composite Propellants in the Initial Period of
Service Life |
4 |
Bojan Zrnić, |
CATM-CFAR
Detector in the Receiver of the Software Defined Radar |
4 |
Bojana Radojković, |
Laser
Cleaning of Textile Artifacts with Metal Threads: Process Parameter
Optimization |
4 |
Branka Đurović, |
Efficacy
of Respiratory Antimicrobial Protection Devices |
3 |
Danica Simić, |
6th
International Scientific Conference on Defensive Technologies OTEH 2014 |
4 |
Danilo Milenković, |
Aerodynamic Compensation of the Modified Guided Anti-Tank Missile
Configuration |
1 |
Danilo Obradović, |
An
Approach to the Design and Development of a Decentralized Data Fusion
Simulator – Battlefield and COMINT System Simulator |
3 |
Darko Vasiljević |
Noise
Equivalent Temperature Difference Model for Thermal Imagers, Calculation
and Analysis |
2 |
Darko Vasiljević, |
Detecting
a Structure in Two Dimensions Combining the Voronoї Tessellation and a
Shape Factor |
1 |
Dejan Ilić |
Influence
of the Axial Fan Blade Angle on the Turbulent Swirl Flow Characteristics |
3 |
Dejan Ivković |
An
Approach to the Design and Development of a Decentralized Data Fusion
Simulator – Battlefield and COMINT System Simulator |
3 |
Dejan Ivković, |
CATM-CFAR
Detector in the Receiver of the Software Defined Radar |
4 |
Dijana Dujak, |
Detecting
a Structure in Two Dimensions Combining the Voronoї Tessellation and a
Shape Factor |
1 |
Djebaili Hamid |
Three
Dimensional Modeling and a Simulation of the Shape Memory Effect |
3 |
Dragan Knežević, |
Noise
Equivalent Temperature Difference Model for Thermal Imagers, Calculation
and Analysis |
2 |
Dragan Marinkovski, |
External
Six-Component Strain Gauge Balance for Low Speed Wind Tunnels |
3 |
Dušan Ćurčić, |
External
Six-Component Strain Gauge Balance for Low Speed Wind Tunnels |
3 |
Dušan Rajić, |
Efficacy
of Respiratory Antimicrobial Protection Devices |
3 |
Đorđe Čantrak, |
Influence
of the Axial Fan Blade Angle on the Turbulent Swirl Flow Characteristics |
3 |
Goran Dikić, |
Adaptive
Error Damping in the Vertical Channel of the Ins/Gps/Baro-Altimeter
Integrated Navigation System |
2 |
Ivan Pokrajac, |
An
Approach to the Design and Development of a Decentralized Data Fusion
Simulator – Battlefield and COMINT System Simulator |
3 |
Jovan Isaković |
External
Six-Component Strain Gauge Balance for Low Speed Wind Tunnels |
3 |
Jovan Radulović, |
Injection
Moulded Polycarbonate Covers of Rocket Launcher Tubes |
1 |
Katarina Maksimović, |
Numerical
Analysis of Damaged Stiffened Panels With Respects to Fracture Mechanics |
1 |
Katarina Savić, |
Noise
Equivalent Temperature Difference Model for Thermal Imagers, Calculation
and Analysis |
2 |
Leonid Gretchikhin |
Air
Pressure Force Acting on Moving Plate |
2 |
Lidija Mitrović |
Increasing
Launch Capability of a UAV Bungee Catapult |
4 |
Ljiljana Jelisavac, |
Comparative Examination of the Chemical Stability of Powder and Double -
Base Rocket Propellants by Measuring Heat Activities and Stabilizer
Content |
1 |
Ljiljana Jelisavac, |
Аnalysis
of the Aging Process of Double-Base Propellants Without an Organic
Stabilizer |
3 |
Marija Samardžić, |
External
Six-Component Strain Gauge Balance for Low Speed Wind Tunnels |
3 |
Marina Simović, |
Noise
Equivalent Temperature Difference Model for Thermal Imagers, Calculation
and Analysis |
2 |
Meri Burzić, |
Effect of
Structural Heterogeneity on the Fracture Mechanics Parameters of Welded
Joints of A.387 Steel |
4 |
Mihailo Lazarević |
Iterative
Learning Control of Integer and Noninteger Order: an Overview |
1 |
Mihailo Lazarević |
Some New
Results on Iterative Learning Control of Noninteger Order |
2 |
Milan Miloševići |
Aerodynamic Compensation of the Modified Guided Anti-Tank Missile
Configuration |
1 |
Milenko Andrić, |
CATM-CFAR
Detector in the Receiver of the Software Defined Radar |
4 |
Milorad Zrilić, |
Laser
Cleaning of Textile Artifacts with Metal Threads: Process Parameter
Optimization |
4 |
Milutin Janković, |
Numerical
Analysis of Damaged Stiffened Panels With Respects to Fracture Mechanics |
1 |
Mirjana Dimić, |
Аnalysis
of the Aging Process of Double-Base Propellants Without an Organic
Stabilizer |
3 |
Mirjana Nikolić |
6th
International Scientific Conference on Defensive Technologies OTEH 2014 |
4 |
Miroslav Jandrić |
Man,
Scientist, Patriot – Mihajlo Pupin (1854 – 1935) |
4 |
Miroslav Jovanović, |
Multi-Objective Fuzzy Optimization of Sizing and Location of
Piezoelectric Actuators and Sensors for Vibration Control Based on the
Particle Swarm Optimization Technique (Part 1: Theoretical Model) |
2 |
Miroslav Jovanović, |
Multi-Objective Fuzzy Optimization of Sizing and Location of
Piezoelectric Actuators and Sensors for Vibration Control Based on the
Particle Swarm Optimization Technique (Part 2: Numerical Analysis) |
3 |
Mohammed Amine Boulahlib, |
Solving an
Irregular Burning Problem in a Small Rocket Motor |
2 |
Momčilo Nikolić |
Solving an
Irregular Burning Problem in a Small Rocket Motor |
2 |
Momčilo Nikolić, |
Mechanical
Properties of HTPB Composite Propellants in the Initial Period of
Service Life |
4 |
Nadica Kozić |
CATM-CFAR
Detector in the Receiver of the Software Defined Radar |
4 |
Nadica Kozić, |
An
Approach to the Design and Development of a Decentralized Data Fusion
Simulator – Battlefield and COMINT System Simulator |
3 |
Nataša Ivanković, |
Efficacy
of Respiratory Antimicrobial Protection Devices |
3 |
Nebojša Lukić |
Multi-Objective Fuzzy Optimization of Sizing and Location of
Piezoelectric Actuators and Sensors for Vibration Control Based on the
Particle Swarm Optimization Technique (Part 1: Theoretical Model) |
2 |
Nebojša Lukić, |
Multi-Objective Fuzzy Optimization of Sizing and Location of
Piezoelectric Actuators and Sensors for Vibration Control Based on the
Particle Swarm Optimization Technique (Part 2: Numerical Analysis) |
3 |
Negovan Ivanković, |
Efficacy
of Respiratory Antimicrobial Protection Devices |
3 |
Nelli Vladimirovna Nikitina |
Homoclinic
Orbits in 3D Dissipative Systems |
4 |
Nemanja Dželebdžić |
Injection
Moulded Polycarbonate Covers of Rocket Launcher Tubes |
1 |
Nemanja Zorić, |
Multi-Objective Fuzzy Optimization of Sizing and Location of
Piezoelectric Actuators and Sensors for Vibration Control Based on the
Particle Swarm Optimization Technique (Part 1: Theoretical Model) |
2 |
Nemanja Zorić, |
Multi-Objective Fuzzy Optimization of Sizing and Location of
Piezoelectric Actuators and Sensors for Vibration Control Based on the
Particle Swarm Optimization Technique (Part 2: Numerical Analysis) |
3 |
Nenad Berić, |
Numerical
Analysis of Damaged Stiffened Panels With Respects to Fracture Mechanics |
1 |
Nikola Bobić |
Comparative Examination of the Chemical Stability of Powder and Double -
Base Rocket Propellants by Measuring Heat Activities and Stabilizer
Content |
1 |
Nikola Bobić, |
Аnalysis
of the Aging Process of Double-Base Propellants Without an Organic
Stabilizer |
3 |
Nikola Gligorijević |
Solid
Propellant Rocket Motors – Selected Topics |
1 |
Nikola Gligorijević, |
Solving an
Irregular Burning Problem in a Small Rocket Motor |
2 |
Nikola Gligorijević, |
Mechanical
Properties of HTPB Composite Propellants in the Initial Period of
Service Life |
4 |
Nikola Jovanović, |
Noise
Equivalent Temperature Difference Model for Thermal Imagers, Calculation
and Analysis |
2 |
Nikola Medar, |
Increasing
Launch Capability of a UAV Bungee Catapult |
4 |
Nikola Vuković, |
Efficacy
of Respiratory Antimicrobial Protection Devices |
3 |
Novica Janković, |
Influence
of the Axial Fan Blade Angle on the Turbulent Swirl Flow Characteristics |
3 |
Olivera Popović, |
Effect of
Structural Heterogeneity on the Fracture Mechanics Parameters of Welded
Joints of A.387 Steel |
4 |
Predrag Okiljević, |
An
Approach to the Design and Development of a Decentralized Data Fusion
Simulator – Battlefield and COMINT System Simulator |
3 |
Predrag Okiljević, |
CATM-CFAR
Detector in the Receiver of the Software Defined Radar |
4 |
Rade Pavlović, |
Objective
Evaluation and Suppressing Effects of Noise in Dynamic Image Fusion |
1 |
Rade Stančić |
Adaptive
Error Damping in the Vertical Channel of the Ins/Gps/Baro-Altimeter
Integrated Navigation System |
2 |
Radica Prokić- Cvetković, |
Effect of
Structural Heterogeneity on the Fracture Mechanics Parameters of Welded
Joints of A.387 Steel |
4 |
Radmila Jančić-Heinemann |
Laser
Cleaning of Textile Artifacts with Metal Threads: Process Parameter
Optimization |
4 |
Radovan Karkalić |
Efficacy
of Respiratory Antimicrobial Protection Devices |
3 |
Saša Brzić, |
Comparative Examination of the Chemical Stability of Powder and Double -
Base Rocket Propellants by Measuring Heat Activities and Stabilizer
Content |
1 |
Saša Brzić, |
Аnalysis
of the Aging Process of Double-Base Propellants Without an Organic
Stabilizer |
3 |
Saša Živković, |
Solving an
Irregular Burning Problem in a Small Rocket Motor |
2 |
Saša Živković, |
Mechanical
Properties of HTPB Composite Propellants in the Initial Period of
Service Life |
4 |
Siniša Gačić, |
Comparative Examination of the Chemical Stability of Powder and Double -
Base Rocket Propellants by Measuring Heat Activities and Stabilizer
Content |
1 |
Siniša Jovanović, |
Injection
Moulded Polycarbonate Covers of Rocket Launcher Tubes |
1 |
Slavica Ristić, |
Influence
of the Axial Fan Blade Angle on the Turbulent Swirl Flow Characteristics |
3 |
Slavica Ristić, |
Laser
Cleaning of Textile Artifacts with Metal Threads: Process Parameter
Optimization |
4 |
Slavica Terzić |
Аnalysis
of the Aging Process of Double-Base Propellants Without an Organic
Stabilizer |
3 |
Slaviša Stojiljković, |
Comparative Examination of the Chemical Stability of Powder and Double -
Base Rocket Propellants by Measuring Heat Activities and Stabilizer
Content |
1 |
Slaviša Stojiljković, |
Аnalysis
of the Aging Process of Double-Base Propellants Without an Organic
Stabilizer |
3 |
Slobodan Ilić |
Multi-Objective Fuzzy Optimization of Sizing and Location of
Piezoelectric Actuators and Sensors for Vibration Control Based on the
Particle Swarm Optimization Technique (Part 2: Numerical Analysis) |
3 |
Slobodan Mandić, |
Aerodynamic Compensation of the Modified Guided Anti-Tank Missile
Configuration |
1 |
Slobodan Stupar, |
Multi-Objective Fuzzy Optimization of Sizing and Location of
Piezoelectric Actuators and Sensors for Vibration Control Based on the
Particle Swarm Optimization Technique (Part 1: Theoretical Model) |
2 |
Slobodan Stupar, |
Multi-Objective Fuzzy Optimization of Sizing and Location of
Piezoelectric Actuators and Sensors for Vibration Control Based on the
Particle Swarm Optimization Technique (Part 2: Numerical Analysis) |
3 |
Slobodan Vrhovac |
Detecting
a Structure in Two Dimensions Combining the Voronoї Tessellation and a
Shape Factor |
1 |
Srdjan Stojković, |
Aerodynamic Compensation of the Modified Guided Anti-Tank Missile
Configuration |
1 |
Sredoje Subotić, |
Solving an
Irregular Burning Problem in a Small Rocket Motor |
2 |
Sredoje Subotić, |
Mechanical
Properties of HTPB Composite Propellants in the Initial Period of
Service Life |
4 |
Stevan Kozomara, |
Solving an
Irregular Burning Problem in a Small Rocket Motor |
2 |
Stevan Kozomara, |
Mechanical
Properties of HTPB Composite Propellants in the Initial Period of
Service Life |
4 |
Suzana Polić, |
Laser
Cleaning of Textile Artifacts with Metal Threads: Process Parameter
Optimization |
4 |
Vera Nikolić-Stanojević |
Numerical
Analysis of Damaged Stiffened Panels With Respects to Fracture Mechanics |
1 |
Vesna Rodić |
Mechanical
Properties of HTPB Composite Propellants in the Initial Period of
Service Life |
4 |
Vlada Sokolović, |
Adaptive
Error Damping in the Vertical Channel of the Ins/Gps/Baro-Altimeter
Integrated Navigation System |
2 |
Vladimir Lapčević |
Device for
Remote Temperature Measurement and Recording |
2 |
Vladimir Petrović |
Objective
Evaluation and Suppressing Effects of Noise in Dynamic Image Fusion |
1 |
Zedira Hamma, |
Three
Dimensional Modeling and a Simulation of the Shape Memory Effect |
3 |
Zijah Burzić |
Effect of
Structural Heterogeneity on the Fracture Mechanics Parameters of Welded
Joints of A.387 Steel |
4 |
Zoran Anastasijević, |
External
Six-Component Strain Gauge Balance for Low Speed Wind Tunnels |
3 |
Zoran Novaković, |
Increasing
Launch Capability of a UAV Bungee Catapult |
4 |
Zorica Jakšić, |
Detecting
a Structure in Two Dimensions Combining the Voronoї Tessellation and a
Shape Factor |
1 |
Željko Senić, |
Efficacy
of Respiratory Antimicrobial Protection Devices |
3 |